Hi pmerana,
Currently there is no way to automate the quasi peak measurements. It must be done manually as you say. I think this is a good suggestion and it might be something we can add to our software in the future.
Side note: In addition to setting the QP frequency manually, you can select a spur in the peak table list and move the spur frequency to the quasi peak frequency entry with the “Selected Spur to Meter” button. You can do this while the QP measurement is active, and you can move the QP measurement to the meter readings table with the “To List” button while the QP measurement is active as well.
I apologize for the inconvenience. Thank you for the feedback.
Regards,
Andrew
