Using our legacy API, the device can be configured to use the 2.9 MHz IF (hung mixer mode). You would have to use a higher frequency than 5 MHz (something like 15 MHz at least). I’m not sure it would get you significantly better numbers, but it might give you a few more dB.
There is probably enough RF-to-IF leakage in the mixer that you could use this mode (SHAPI_Configure, use 2.9 MHz IF set to true) and inject your signal directly at 2.92 MHz (at a higher amplitude). This is the closest to direct ADC access the SA series offers.
These are just my thoughts, and may not work, but if you give it a try let me know what you find. The BB60C has more direct ADC access, but realistically, the SM200A would be the ideal choice.
