Reply To: BB60C NF value

Hi Justin,
Thanks for your answer.
Just to be sure, for the NF measurment, what is the setup ?

For 500MHz central frequency, I use 10 MHz bandwidth, the reference level to -50dBm.
I just put a marker noise at 501 MHz and read the value ?
I do not have to set the trace in average mode ?

Cause the 501MHz value I found is only 9.2 dB NF instead of the 16.55 dB calculate from your DANL worst case spec.
I always have margin between the datasheet of my systems and the reality, but here it is quite crazy.
Best regards