Hi Cory. I am very happy that the software has finally been updated for the Signal hound. Our company uses it daily to test our products and I can confirm that the Spike software runs all day and does not have the frustration of the previous software version that continuously lost the USB connecton when using the TG44A. I would however like to suggest that the markers are not really very usable as we measure filters and amplifier bandwidth and need to know either the 3dB or 10dB points. I notice that the markers on Spike can no longer have the frequency entered manually. I would suggest that a marker function for measuring bandwidth that automatically puts two markers either side of a centre marker, ( 3 markers ) on the screen, and then the centre marker frequency can be dragged or a frequency entered manually be considered. You need to add at least 3 markers to measure the peak plus 3dB or 10dB points for say a filter. I would also have a setting to set the bandwidth markers for whatever -dB level you want as some may want 3dB or 10dB or other for BW.
Regards mark
