Hello Andrew,
thanks for the prompt answer, let me attach an image to better explain.
As you can see in the image, I’ve done these steps:
– Run a peak sweep
– In “Peak Table”, clicked scan for spuries
– In the meter readings, all spuries have been scanned. One of these, 480.957031 kHz has been tested with the Meter settings tab, but as you can see, the Quasi-Pk table in “Meter readings” gives 31.53 dBuV, while the QP detector of meter settings gives 46.66 dBuV. This mismatch is always present.
What is the cause of this mismatch?
Uploaded Failed |  |