My answers are embedded within your original response.
A few questions for you:
1. Does the BB60C run successfully in Spike on that PC? YES – It works perfectly fine.
2. Are you attempting to run the BB60C while the VSG60A is simultaneously in use? If so, can you try without the VSG60A running? Yes. But I have tried with and without to no avail.
3. Is -1 the only error seen, and is it returned from the Open Device VI? I have seen Err12 and Err13 as well. I saw those only when I changed the VI to allow the reference to the DLL to be setup via the diagram and not selected in the “Configure” part of the C DLL call.
While troubleshooting, after receiving an error the LabVIEW software should be restarted. I have tried this also.
Lastly, when I try to run an Example (Acquire Sweep) I receive this error: “The library specified for this node cannot be found or cannot be loaded. Right-click the Call Library Function node and select Configure, then choose the correct library name or path.” It is pointing to the proper DLL for the 32bit version of LabVIEW.
