Hi AJ there still appears to be issues with the markers frequency display on the top of the screen not saying the same as the marker set frequency. You can see this by inputting a 10MHz signal, 30MHz span and then manually setting the marker frequency to 10MHz. On the top of the screen it shows something either side of 10MHz, mine shows 10.000942MHz and it appears that the marker cannot be moved exactly onto 10MHz and jumps in steps. This gets worse when the span is decreased and with a 10MHz span 10MHz then reads 9.999037MHz. You can then see that the marker diamond does sit slightly lower that the 10MHz peak. If you then press peak search the marker still does not go to the peak 10MHz signal and still sits slightly low at 9.999037 Can this be fixed. Regards mark
