Reply To: USB cable

A.J.-

In my case I guess I lucked out. I got a new cable from Digikey and that seems to do the trick (Qualtek p/n 3023011-01M). Looking at the micro USB end of my original cable from the side, I can see that the metal plug part is bent upwards some. That must be the problem.

Don’t know if this is the situation on the BB60C, but I have found in the past that micro USB connectors that are all-SMT can get flakey quickly. If I’m putting a micro USB connector on a PCB, I’ll specify the kind where the pins of the metal body are through hole.

Thanks and have a great TG!
-Randy