Reply To: Video trigger in modulation analysis

Thank you!

Video trigger works!
I can capture and decode 30ms pulse, repeating in 1sec, it was almost impossible to catch it and decode without video trigger.

The only bad thing I’ve noticed in new version – video trigger option sometimes makes software unresponsible, it hangs for a minute and then crashes. Usually it happens when I set video trigger on and then uncheck “auto IF bandwidth” to increase bandwidth from automatic 30kHz to 100-200kHz to get more accurate Eye Diagram. When I unchek “auto” it jumps to full 27MHz (may be it is too high for my settings?) and then software hangs.

I’ll try to find if I can reproduce the problem without any signal.

I see, orange led on BB60 means, that software is reading data, but led doesn’t become green even if I press “Single” in modulation analysis (when video trigger on). Why it is doing something in Single mode?

Attachments:

You must be logged in to view attached files.