Hi Mike/Randy,
For EMC debugging I use average (set to 64 counts) and max hold traces.
I take an ambient capture, then a DUT on, then an ‘improved DUT on’ sweep. There are 6 available traces so this works out quite well.
As AJ has suggested…
You’ll find EMC lab’s receivers, with their preselection filters, specific RBWs and defined QuasiPeak, Average and Peak detectors, that you wont reproduce EMC receiver results with a spectrum analyser.
However the BB60C is more than up to the task of EMC debugging.
Feel free to email me directly with some more specifics at
apollyon25 at hotmail dot com
I’m more than happy to give you a few things to look at.
What other bits and bobs do you have for EMC?
Jared
