Hi Tisha,
I really like all of these suggestions. Thank you for taking the time to write these out, and thank you for using our products.
I keep track of all customer requests and try to implement a few for each release. Obviously I can’t guarantee I will get to all of them.
A quick note, the VSG does drift for several minutes while warming up. Is it possible this is what you were seeing? Once warmed up, the frequency should not drift enough to need to reconfigure the demod settings. I would try to plug in the VSG for ~15 minutes before using it for frequency-sensitive applications. If you see large frequency drifts even after this period, let us know. Also, there is the adjustment screw on the VSG, which allows you to manually adjust the time base after warm-up. A small adjustment will generally get you within 1 ppm. Just set it to 1 GHz CW and use the BB60C with a 50 kHz span and adjust to center.
Thanks again for the feedback.
Regards,
A.J. & Justin
